Utilizing 640nm professional long lightwave, HCB3 IPL hair removing device can conduct precise and powerful hair removal. HCB3 can run under constantly low temperatures; thus, there is no need for ice compression and the hair removing process will cause no pain. Well designed by engineers at Ace-Tec, the HCB3 IPL device can conduct hair removal and skin rejuvenation simultaneously, which gives you white and firm skin. Moreover, the HCB3 IPL hair removal device is also well-known for its 0.9-second flash hair removal.
Avoid strong light for damaging your eyes. HCB3 IPL hair removing device's automatic mode only needs to fit the skin to automatically emit light.
No need to attach the head. Take off the whole body.
Well-designed by Ace-Tec, the HCB3 intense pulsed light hair removal machine can conduct five-speed energy adjustment.
The instruction lights will be lit up when switching to automatic mode.
While the long pressing over the power button can switch the IPL device off, a short press can lead to the adjustment of hair removing speed levels (1-5 levels).
The large area of light outlets can greatly improve IPL hair removal efficiency.
Narrow edge design at the light exit can fit small parts more accurately. With the compact design, there is no need to change heads for the HCB3 IPL hair removing device. You can complete whole body hair removal in one machine.
The IPL device is easy to grip and hold. Lightweight, not tired after using for a long time.
The effective number of shots
Continuous firing light period (s)
Level 1: 0.9±0.05s
Level 2: 1.13±0.06s
Level 3: 1.31±0.07s
Level 4: 1.51±0.08s
Level 5: 1.71±0.1s
Level 1: 8.3±2J
Level 2: 9.1±2J
Level 3: 9.8±2J
Level 4: 10.6±2J
Level 5: 11.5±2J
Manual mode & Automatic mode
Preparation for shaving: Use a shaving knife to shave off the hair on the surface of the skin.
Connect the Power and Turn on: After connecting the power, long-press the power button for 0.5 seconds to turn on, and short press the power button to switch levels (tips: Accessory goggles must be worn to protect eyes during the IPL hair removal process)
Start IPL hair removal: After booting up the IPL device, choose different levels and modes (manual/automatic) according to requirements. The lamp holder is in close contact with the skin vertically, and when the light-out key indicator is on, press the light-out key to remove hair.
Select the right mode:
The default manual mode after booting, the light will be lighted by pressing the light button after the lamp head is attached to the skin.
Long press the light button to switch to automatic mode, only need to stick to the skin vertically without pressing a button to automatically emit light, because it emits light automatically, the lamp holder needs to slide against the skin during hair removal.
The effects of depilation on the human body are mainly related to depilation equipment. It has to be admitted that most of the previous IPL hair removal devices indeed have some defects. As the previous IPL devices normally use the ultra high energy of a single laser pulse to burn hair follicles, the wrong use of it can indeed burn the skin. Whereas, possessing a freezing and cooling system, the IPL hair removing device produced by Ace-Tec can effectively protect the skin from getting scalded and reduce the perceived pressure on the skin surface. Thus, as for Ace-Tec's HCB3 IPL machine for sale, it is very safe for the human body and there are no obvious adverse effects.
The longer the wavelength, the stronger the penetration to the skin, the better the hair removal effect, and the less likely it is to damage the skin. The wavelength of the pulsed light approved by the FDA for hair removal needs to be >550nm.
Short light waves cannot fully act on the hair follicles, and a large proportion of them are absorbed by the epidermis and hemoglobin, causing discomforts such as skin redness and swelling. The longer the wavelength of light, the stronger the penetrating power, and the less likely it is to be absorbed by the skin, especially for Asians, most of the skin color is type III-V. The long red-orange light wave above 600nm on the spectrum can reduce the pain and heat during hair removal. Damage, and reach the roots of hair follicles more effectively.
*The wavelength of the FDA version is >560nm, which provides stronger performance for the fair-skinned people of type Ⅰ and type Ⅱ.
HCB3 Hair Removal Apparatus uses IPL intense pulsed light technology to conduct clean hair removal. Meanwhile, it also uses selective photothermolysis effects to rejuvenate skin. The photon is a wide band. This home-use beauty device is a section of composite light intercepted by a filter, so it will contain part of the skin rejuvenation band, so as to further achieve the effect of skin rejuvenation.